The PowerCut 10x™ has a number of accessories to increase performance, operator safety and convenience when using the saw. 

The 7-gallon (26.5 L) recirculating coolant system is constructed of corrosion resistant materials for maximum durability. The reservoir fits conveniently in the available cabinet, or can be placed near the machine in existing lab furniture. A removable catch screen enables quick cleaning of larger particles. Baffles inside the reservoir trap particulates. The optional roller cart (included with cabinet) allows easy transfer for cleaning. 

Quick-Slide Vise is made of hardened stainless steel, the quick-slide vise features a lead-screw that disengages for quick and easy operation. The vises can be positioned anywhere along the T-slots, and allow samples up to 3" (76 mm) deep to be secured.

Vertical adjusting clamp can be positioned in any orientation throughout the T-slots in the tables. The height adjustable lever allows various size samples up to 2.25" (57 mm) thick to be secured. Interchangeable pads are available for a variety of sample shapes. Each clamp includes one (1) angled pad and one (1) flat pad.

The extraction port is used to remove smoke and odor from the cutting chamber. The 3" diameter port allows a hose to connect with stand-alone or facility filtration systems. 

Blade Position Laser Indicator projects a line on the sample for quick, visual alignment with the cutting path. 

The cabinet/stand is designed to provide a solid platform to support the PowerCut 10x™. Made of cross-braced aluminum for vibration control, strength and stability, it is configured for proper routing of electrical cords, drain hose and coolant supply tubing. It features a large, deep drawer for storing fixtures, tools and blades, and a hinged door to house the recirculating coolant system. One (1) #5-4210 Roller Cart is included. 

The 415V machine comes installed with the safety interlock, which locks the saw enclosure during operation. If desired for the 230 or 480 V versions, it must be ordered and factory-installed.

These blades are specially engineered for laboratory sectioning. Aluminum oxide (Al2O3), silicon carbide (SiC), diamond and cubic boron nitride (CBN) abrasives are offered in various bond types for sectioning a wide variety of materials. Choosing the right blade for the right material is crucial in reducing thermal and structural deformation.

Protective metal arbor inserts are molded into resin bonded blades. Blade arbor holes fit both 32 mm and 1.25" spindle arbors. All blades are precision ground to slightly less than the stated diameter to universally fit all makes and models of cutting machines. Blotters are supplied to shield vibration from the metal flanges and help protect the blade from breaking during use. Blades designated with the letter "P" feature a special textured pattern and those with a letter "R" are fiber reinforced.

Mineral - Aluminum oxide is recommended for cutting ferrous metal alloys and silicon carbide is recommended for non-ferrous metal alloys. Diamond is best for hard, non-metal alloys. CBN is best for tool & die steels and other very hard/tough ferrous metal alloys.

Diameter - Select the blade diameter most appropriate for the saw, sample type and size.

Bond - Metal Bond blades provide longer life and durability than resin bond, but result in a coarser surface finish. Resin Bond blades cut cooler with less friction and minimal odor. Rubber Bond blades are available in thinner options and are ideal for environments where durability is desired.

Use the drop-down menus to refine your product search.

Cutting fluid enhances blade performance, extends blade life and minimizes material deformation by reducing heat during sectioning. Use Deli-Cut low speed cutting fluid for gravity-fed saws at full strength. Use Maxi-Cut or Lubri-Cut for speeds above 1,000 RPM, diluted 2-5% with water. Lubri-Cut has a low oil content and is easier to clean.

Use the drop-down menus to refine your product search.

The recirculating filtration system allows up to 3-stage filtering down to 2 microns and is housed in a durable cabinet that supports Allied grinding/polishing machines. The environmentally friendly filtration system saves up to ½ gallon of water per minute with quick-change filters. System includes cabinet/stand, roll-out reservoir with 7-gallon (26.5 L) capacity and pull-out storage drawer.