Products tagged with 'recirculating coolant system'

The PowerCut 10x™ has a number of accessories to increase performance, operator safety and convenience when using the saw. 

The 7-gallon (26.5 L) recirculating coolant system is constructed of corrosion resistant materials for maximum durability. The reservoir fits conveniently in the available cabinet, or can be placed near the machine in existing lab furniture. A removable catch screen enables quick cleaning of larger particles. Baffles inside the reservoir trap particulates. The optional roller cart (included with cabinet) allows easy transfer for cleaning. 

Quick-Slide Vise is made of hardened stainless steel, the quick-slide vise features a lead-screw that disengages for quick and easy operation. The vises can be positioned anywhere along the T-slots, and allow samples up to 3" (76 mm) deep to be secured.

Vertical adjusting clamp can be positioned in any orientation throughout the T-slots in the tables. The height adjustable lever allows various size samples up to 2.25" (57 mm) thick to be secured. Interchangeable pads are available for a variety of sample shapes. Each clamp includes one (1) angled pad and one (1) flat pad.

The extraction port is used to remove smoke and odor from the cutting chamber. The 3" diameter port allows a hose to connect with stand-alone or facility filtration systems. 

Blade Position Laser Indicator projects a line on the sample for quick, visual alignment with the cutting path. 

The cabinet/stand is designed to provide a solid platform to support the PowerCut 10x™. Made of cross-braced aluminum for vibration control, strength and stability, it is configured for proper routing of electrical cords, drain hose and coolant supply tubing. It features a large, deep drawer for storing fixtures, tools and blades, and a hinged door to house the recirculating coolant system. One (1) #5-4210 Roller Cart is included. 

The 415V machine comes installed with the safety interlock, which locks the saw enclosure during operation. If desired for the 230 or 480 V versions, it must be ordered and factory-installed.

Recirculating coolant system connects seamlessly to the TechPress 3x™ for standalone or “green” operation. The 3-gallon system circulates a unique coolant that effectively cools the mold assembly after the curing cycle. This not only saves water (~ 12 gallons per cycle), it eliminates problems associated with hard water deposits in the coolant system inside the press, which can cause clogging over time.

Mold/Heater Assemblies are available to accommodate various size samples. They may be changed from 25 mm through 2 inch, and include a duplexing spacer, allowing up to two mounts per cycle to be produced at one time. The new coiled heating and cooling lines within the cast housing and thin-walled cylinders allow quick and efficient cycling.